The best setting for Burst Mode to work with 10 mailboxes

[sublime]

Hi Admin,..

A quick question on the Burst mode. Below is my scenario:

- 1 SMTP access (587)
- 10 different mailboxes
- Each mailbox has limitation of 200/hour and 2000 per day. (it is confirmed that if i have 10 mailboxes, the daily limit for all will be up to 20K)

I have input 10 of them in the Maxbulk mailer and choosed the burst mode. What would be the best setting (in conjunction with connections setting and my daily allowance) to make the software runs all accounts but would sends below the threshold (200/hour, 2K/day).

Thanks.

 

[stanbusk]

Re: The best setting for Burst Mode to work with 10 mailboxe

Choose one account, set the bulk settings for that account and after selecting the burst mode and checking the accounts you want to use, set that account as the default one. Next to 'Delivery' you will see an estimation of the number of messages that will be sent per hour and per day.

 

[sublime]

Re: The best setting for Burst Mode to work with 10 mailboxe

thanks for replying, one more question please. What does it means if i set the connection to 5 on each of them, and the bulk mail set to 100? Does that means in one session (for one SMTP account) it will send out 100 x 5=500? or...?

 

[stanbusk]

Re: The best setting for Burst Mode to work with 10 mailboxe

It will open 5 connections to the server at the same time and will send 20 messages per connection.

 

[sublime]

Re: The best setting for Burst Mode to work with 10 mailboxe

so in other words,.. if i set connection to 10, that means the time to send 100 emails will be quicker and therefore because i have 100 limitation per hour (for example as oppose to 200), i need to set longer interval,..

Is that correct?

(I have T1 internet speed, so it wont be a problem,.)

 

[stanbusk]

Re: The best setting for Burst Mode to work with 10 mailboxe

Yes, absolutely.