We've been trying all week to configure MaxBulk to work for us. We're pretty sure it's end user error, but we're really baffled at this point.
When we send just an email to just ONE recipient, the email goes through. However, if we try 2, 3, or 50 at a time, it's not working.
Strangely, we get the "Mail sent successfully!" there at the top of the window (just below the toolbar), but during the sending process, we get the error audio sound—one for each recipient—and in the Delivery tab text, we get:
to a total of: 2 recipient(s) [2/2]
Sent: 0
Failed: 2 (Bounces not included!)
I'm pretty sure this means that the message did NOT go through.
At this point, we're stymied. Can anyone help figure out why we're able to send to one recipient successfully, but not to multiples?
I'm including the entire "Delivery' tab text below. I've only changed our domain name to MYDOMAIN. Otherwise, this is verbatim. This happens to be to a test message where we sent the message to just 2 recipients:
[00] 7/9 10:43:51 --> Connecting socket with mail.MYDOMAIN.com
[00] 7/9 10:43:51 +OK Hello there.
[00] 7/9 10:43:51 > USER m2316227
[00] 7/9 10:43:51 +OK Password required.
[00] 7/9 10:43:51 > PASS *******
[00] 7/9 10:43:51 +OK logged in.
[00] 7/9 10:43:51 > QUIT
[01] 7/9 10:43:51 --> Connecting socket [1] with 2 entries to mail.MYDOMAIN.com Port:25
[01] 7/9 10:43:51 ~ Status: Connected
[00] 7/9 10:43:51 +OK Bye-bye.
[01] 7/9 10:43:51 220 postalmail-a3.dreamhost.com ESMTP
[01] 7/9 10:43:51 > HELO MYDOMAIN.com
[01] 7/9 10:43:52 250 postalmail-a3.dreamhost.com
[01] 7/9 10:43:52 > MAIL FROM:<[email protected]>
[01] 7/9 10:43:52 250 Ok
[01] 7/9 10:43:52 > RCPT TO:<[email protected]> [1/2]
[01] 7/9 10:43:52 554 <[email protected]>: Relay access denied
[01] 7/9 10:43:52 > MAIL FROM:<[email protected]>
[01] 7/9 10:43:52 503 Error: nested MAIL command
[01] 7/9 10:43:52 > RCPT TO:<[email protected]> [2/2]
[01] 7/9 10:43:52 554 <[email protected]>: Relay access denied
[01] 7/9 10:43:52 ~ Status: Stage 3 dispatch done [3/2]
[01] 7/9 10:43:52 > QUIT
[01] 7/9 10:43:52 221 Bye
[01] 7/9 10:43:52 ~ Status: Stage 4 dispatch done [3/2]
[00] 7/9 10:43:52 ~ Status: [-]
[00] 7/9 10:43:52 ~ Status: Closing all streams
[00] 7/9 10:43:52 ~ Status: Creating report...
[00] 7/9 10:43:52 ~ Status: Sending report...
[01] 7/9 10:43:52 --> Connecting socket [1] with 1 entries to mail.MYDOMAIN.com Port:25
[01] 7/9 10:43:52 ~ Status: Connected
[01] 7/9 10:43:52 220 postalmail-a4.dreamhost.com ESMTP
[01] 7/9 10:43:52 > HELO MYDOMAIN.com
[01] 7/9 10:43:52 250 postalmail-a4.dreamhost.com
[01] 7/9 10:43:52 > MAIL FROM:<[email protected]>
[01] 7/9 10:43:52 250 Ok
[01] 7/9 10:43:52 > RCPT TO:<[email protected]> [1/1]
[01] 7/9 10:43:53 250 Ok
[01] 7/9 10:43:53 354 End data with <CR><LF>.<CR><LF>
[01] 7/9 10:43:53 250 Ok: queued as 854FB11EAB1
[01] 7/9 10:43:53 ~ Status: Stage 3 dispatch done [2/1]
[01] 7/9 10:43:53 > QUIT
[01] 7/9 10:43:53 221 Bye
[01] 7/9 10:43:53 ~ Status: Stage 4 dispatch done [2/1]
[00] 7/9 10:43:53 ~ Status: [-]
[00] 7/9 10:43:53 ~ Status: Finishing...
-----------------------------------------------------------------------
MaxBulk Mailer Delivery Report [#16] - 7/9/06
-----------------------------------------------------------------------
Mailer version: 4.4.2-US (42)
Status: Pro - Registered
Machine OS/speed: 10.4.7/2Ghz
SMTP server address: mail.MYDOMAIN.com [Port: Default] SSL Off
Authentication: POP (Settings)
Address: mail.MYDOMAIN.com [Port: Default] SSL Off
Streams: 1 [1 Used]
Delivery mode: Singly (Tag processing ON)
Groups: 5
Interval: 00:01
Delivery start date: 7/9/06 at 10:43:50 AM
End date: 7/9/06 at 10:43:52 AM
Total duration: 2 second(s) - Retries: 0/6
Rate: 0.50 recipient(s)/second
to a total of: 2 recipient(s) [2/2]
Sent: 0
Failed: 2 (Bounces not included!)
Mail subject: How Health Works update for July 2006
Mail priority: Normal
Return receipt: No
Mail format: Styled Text [ISO-8859-1]
Mail size: 2.02 KB (Doesn't include attachments)
Attachments: none
-----------------------------------------------------------------------
[00] 7/9 10:43:53 ~ Status: Finished.
When we send just an email to just ONE recipient, the email goes through. However, if we try 2, 3, or 50 at a time, it's not working.
Strangely, we get the "Mail sent successfully!" there at the top of the window (just below the toolbar), but during the sending process, we get the error audio sound—one for each recipient—and in the Delivery tab text, we get:
to a total of: 2 recipient(s) [2/2]
Sent: 0
Failed: 2 (Bounces not included!)
I'm pretty sure this means that the message did NOT go through.
At this point, we're stymied. Can anyone help figure out why we're able to send to one recipient successfully, but not to multiples?
I'm including the entire "Delivery' tab text below. I've only changed our domain name to MYDOMAIN. Otherwise, this is verbatim. This happens to be to a test message where we sent the message to just 2 recipients:
[00] 7/9 10:43:51 --> Connecting socket with mail.MYDOMAIN.com
[00] 7/9 10:43:51 +OK Hello there.
[00] 7/9 10:43:51 > USER m2316227
[00] 7/9 10:43:51 +OK Password required.
[00] 7/9 10:43:51 > PASS *******
[00] 7/9 10:43:51 +OK logged in.
[00] 7/9 10:43:51 > QUIT
[01] 7/9 10:43:51 --> Connecting socket [1] with 2 entries to mail.MYDOMAIN.com Port:25
[01] 7/9 10:43:51 ~ Status: Connected
[00] 7/9 10:43:51 +OK Bye-bye.
[01] 7/9 10:43:51 220 postalmail-a3.dreamhost.com ESMTP
[01] 7/9 10:43:51 > HELO MYDOMAIN.com
[01] 7/9 10:43:52 250 postalmail-a3.dreamhost.com
[01] 7/9 10:43:52 > MAIL FROM:<[email protected]>
[01] 7/9 10:43:52 250 Ok
[01] 7/9 10:43:52 > RCPT TO:<[email protected]> [1/2]
[01] 7/9 10:43:52 554 <[email protected]>: Relay access denied
[01] 7/9 10:43:52 > MAIL FROM:<[email protected]>
[01] 7/9 10:43:52 503 Error: nested MAIL command
[01] 7/9 10:43:52 > RCPT TO:<[email protected]> [2/2]
[01] 7/9 10:43:52 554 <[email protected]>: Relay access denied
[01] 7/9 10:43:52 ~ Status: Stage 3 dispatch done [3/2]
[01] 7/9 10:43:52 > QUIT
[01] 7/9 10:43:52 221 Bye
[01] 7/9 10:43:52 ~ Status: Stage 4 dispatch done [3/2]
[00] 7/9 10:43:52 ~ Status: [-]
[00] 7/9 10:43:52 ~ Status: Closing all streams
[00] 7/9 10:43:52 ~ Status: Creating report...
[00] 7/9 10:43:52 ~ Status: Sending report...
[01] 7/9 10:43:52 --> Connecting socket [1] with 1 entries to mail.MYDOMAIN.com Port:25
[01] 7/9 10:43:52 ~ Status: Connected
[01] 7/9 10:43:52 220 postalmail-a4.dreamhost.com ESMTP
[01] 7/9 10:43:52 > HELO MYDOMAIN.com
[01] 7/9 10:43:52 250 postalmail-a4.dreamhost.com
[01] 7/9 10:43:52 > MAIL FROM:<[email protected]>
[01] 7/9 10:43:52 250 Ok
[01] 7/9 10:43:52 > RCPT TO:<[email protected]> [1/1]
[01] 7/9 10:43:53 250 Ok
[01] 7/9 10:43:53 354 End data with <CR><LF>.<CR><LF>
[01] 7/9 10:43:53 250 Ok: queued as 854FB11EAB1
[01] 7/9 10:43:53 ~ Status: Stage 3 dispatch done [2/1]
[01] 7/9 10:43:53 > QUIT
[01] 7/9 10:43:53 221 Bye
[01] 7/9 10:43:53 ~ Status: Stage 4 dispatch done [2/1]
[00] 7/9 10:43:53 ~ Status: [-]
[00] 7/9 10:43:53 ~ Status: Finishing...
-----------------------------------------------------------------------
MaxBulk Mailer Delivery Report [#16] - 7/9/06
-----------------------------------------------------------------------
Mailer version: 4.4.2-US (42)
Status: Pro - Registered
Machine OS/speed: 10.4.7/2Ghz
SMTP server address: mail.MYDOMAIN.com [Port: Default] SSL Off
Authentication: POP (Settings)
Address: mail.MYDOMAIN.com [Port: Default] SSL Off
Streams: 1 [1 Used]
Delivery mode: Singly (Tag processing ON)
Groups: 5
Interval: 00:01
Delivery start date: 7/9/06 at 10:43:50 AM
End date: 7/9/06 at 10:43:52 AM
Total duration: 2 second(s) - Retries: 0/6
Rate: 0.50 recipient(s)/second
to a total of: 2 recipient(s) [2/2]
Sent: 0
Failed: 2 (Bounces not included!)
Mail subject: How Health Works update for July 2006
Mail priority: Normal
Return receipt: No
Mail format: Styled Text [ISO-8859-1]
Mail size: 2.02 KB (Doesn't include attachments)
Attachments: none
-----------------------------------------------------------------------
[00] 7/9 10:43:53 ~ Status: Finished.