I had a play with the free version, and it appeared to do what I wanted so I bought the PRO version 7.7, then I started doing some test mailings to myself at several of my addresses.
Problem 1
HYPERLINKS when inserted into the email show up correctly in the preview, BUT when the email is received it is either in the following format:-
http://www.animal-acupuncture.com/samplemenu.pdf
http://www.animal-acupuncture.com
at 3 of 4 email addresses.
EDIT(I have just looked at my post and it has interpreted those hyperlinks as valid and even clickable...in my received emails they are usually black, not underlined, and certainly not clickable)EDIT
At the 4th address the links appear to display correctly, ie they are underlined and in blue, BUT altho clickable they
just provoke the error "is not a registered protocol".
I must say that all 4 addresses display clickable links correctly when received from non-MBM sources.
Sometimes one of the addresses will provoke the following situation...the SUBJECT line is removed, the SENDER is changed to <[email protected]>
and the body of the message is prepended with some stuff about MIME , then the rest of the body is presented minus the pic and garbled as follows
MAIL FROM:<[email protected]>
Message-Id: <smCTO7I2F71LyGjJxaMRWgEBeIKowkpsDfR7gyR4DdIS@animal-acupuncture.com>
Mime-Version: 1.0
From: "David Gilchrist" <[email protected]>
To: "davidgilchrist" <[email protected]>
Reply-To: [email protected]
Subject: [Ann] test 04/07/1020
Date: Sun, 4 Jul 2010 16:34:49 +1000
X-Bounce-Tracking-Info: <ZGF2aWRnaWxjaHJpc3QJCQlkYXZpZGdpbGNocmlzdEBhdXN0YXJuZXQuY29tLmF1CVtBbm5dIHRlc3QgMDQvMDcvMTAyMAkxNQkJNglib3VuY2UJbm8Jbm8=>
Content-type: multipart/alternative;
Boundary="--=BOUNDARY_741634_ANUQ_LGRU_AYVE_PTCY"
This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
----=BOUNDARY_741634_ANUQ_LGRU_AYVE_PTCY
Content-type: text/plain;
charset=iso-8859-1; format=flowed
Content-transfer-encoding: quoted-printable
Hello davidgilchrist,
this is a test=2E
here are some hyperlinks
www=2Eanimal-acupuncture=2Ecom/samplemenu=2Epdf
www=2Eanimal-acupuncture=2Ecom
did they appear in blue with blue underline?
were they clickable? successfully?
here is a picture
did it show up properly?
Thanx
D
PROBLEM 2
After importing a text list into the recipients pane
and sending to that list, I was always short either one or 2 deliveries.
Always the second in the list, and sometimes the first.
Didnt matter if the list was 5 or 20 addresses. Always the 2nd on the list didnt send.
Hmmm!
Error message was "503 Command rejected no valid MAIL FROM: command received yet.
I Hope you can help and I am missing something simple, because MBMis unusable for me. I am using Windows7.
Here is one of the logs...
[01] 7/4 16:24:47 ~ Opening connection for delivery...
[01] 7/4 16:24:47 ~ Connecting to securemail.internode.on.net:465 Port:465
[01] 7/4 16:24:48 ~ Connected
[01] 7/4 16:24:48 > EHLO [192.168.1.2]
[01] 7/4 16:24:49 220 internode.on.net bld-mail13 ESMTP Ready
[01] 7/4 16:24:49 > EHLO [192.168.1.2]
[01] 7/4 16:24:49 250-internode.on.net. Hello [192.168.1.2] (118.208.12.55)
250-AUTH PLAIN LOGIN
250-ETRN
250-X-ID 626c642d6d61696c313331313235333332363933
250-SIZE 52428800
250 HELP
[01] 7/4 16:24:49 > AUTH PLAIN [email protected] *********
[01] 7/4 16:24:49 250-internode.on.net. Hello [192.168.1.2] (118.208.12.55)
250-AUTH PLAIN LOGIN
250-ETRN
250-X-ID 626c642d6d61696c313331313235333332363933
250-SIZE 52428800
250 HELP
[01] 7/4 16:24:49 > AUTH PLAIN [email protected] *********
[01] 7/4 16:24:49 235 login succeeded
[01] 7/4 16:24:49 > MAIL FROM:<[email protected]>
[01] 7/4 16:24:49 235 login succeeded
[01] 7/4 16:24:49 > MAIL FROM:<[email protected]>
[01] 7/4 16:24:49 250 Command MAIL OK
[01] 7/4 16:24:49 > RCPT TO:<[email protected]> [1/6]
[01] 7/4 16:24:49 250 Command MAIL OK
[01] 7/4 16:24:49 250 remote recipient accepted
[01] 7/4 16:24:50 > MAIL FROM:<[email protected]>
[01] 7/4 16:24:50 354 Command DATA Start mail input; end with <CRLF>.<CRLF>
[01] 7/4 16:24:50 ~ Sending message
[01] 7/4 16:24:50 ~ with ID <[email protected]>
[01] 7/4 16:24:50 ~ To
[00] 7/4 16:24:50 ~ Sending attachment "Untitled-10.jpg"
[01] 7/4 16:24:52 250 message sent ok
[01] 7/4 16:24:52 > RCPT TO:<[email protected]> [2/6]
[01] 7/4 16:24:52 503 Command rejected no valid MAIL FROM: command received yet
[01] 7/4 16:24:52 > MAIL FROM:<[email protected]>
[01] 7/4 16:24:52 250 Command MAIL OK
[01] 7/4 16:24:52 > RCPT TO:<[email protected]> [3/6]
[01] 7/4 16:24:52 250 remote recipient accepted
[01] 7/4 16:24:53 354 Command DATA Start mail input; end with <CRLF>.<CRLF>
[01] 7/4 16:24:53 ~ Sending message
[01] 7/4 16:24:53 ~ with ID <[email protected]>
[01] 7/4 16:24:53 ~ To [email protected]
[00] 7/4 16:24:53 ~ Sending attachment "Untitled-10.jpg"
[01] 7/4 16:24:55 250 message sent ok
[01] 7/4 16:24:55 > MAIL FROM:<[email protected]>
[01] 7/4 16:24:55 250 Command MAIL OK
[01] 7/4 16:24:55 > RCPT TO:<[email protected]> [4/6]
[01] 7/4 16:24:55 250 remote recipient accepted
[01] 7/4 16:24:55 354 Command DATA Start mail input; end with <CRLF>.<CRLF>
[01] 7/4 16:24:55 ~ Sending message
[01] 7/4 16:24:55 ~ with ID <[email protected]>
[01] 7/4 16:24:55 ~ To [email protected]
[00] 7/4 16:24:56 ~ Sending attachment "Untitled-10.jpg"
[01] 7/4 16:24:58 250 message sent ok
[01] 7/4 16:24:58 > MAIL FROM:<[email protected]>
[01] 7/4 16:24:58 250 Command MAIL OK
[01] 7/4 16:24:58 > RCPT TO:<[email protected]> [5/6]
[01] 7/4 16:24:58 250 remote recipient accepted
[01] 7/4 16:24:58 354 Command DATA Start mail input; end with <CRLF>.<CRLF>
[01] 7/4 16:24:58 ~ Sending message
[01] 7/4 16:24:58 ~ with ID <[email protected]>
[01] 7/4 16:24:58 ~ To [email protected]
[00] 7/4 16:24:58 ~ Sending attachment "Untitled-10.jpg"
[01] 7/4 16:25:00 250 message sent ok
[01] 7/4 16:25:01 > MAIL FROM:<[email protected]>
[01] 7/4 16:25:01 250 Command MAIL OK
[01] 7/4 16:25:01 > RCPT TO:<[email protected]> [6/6]
[01] 7/4 16:25:01 250 local recipient ok
[01] 7/4 16:25:01 354 Command DATA Start mail input; end with <CRLF>.<CRLF>
[01] 7/4 16:25:01 ~ Sending message
[01] 7/4 16:25:01 ~ with ID <[email protected]>
[01] 7/4 16:25:01 ~ To [email protected]
[00] 7/4 16:25:01 ~ Sending attachment "Untitled-10.jpg"
[01] 7/4 16:25:03 250 message sent ok
[01] 7/4 16:25:03 ~ Stage 3 dispatch done [7/6]
[01] 7/4 16:25:03 > QUIT
[01] 7/4 16:25:03 221 Command QUIT, disconnecting
[01] 7/4 16:25:03 ~ Stage 4 dispatch done [7/6]
[00] 7/4 16:25:03 ~ [-]
[00] 7/4 16:25:03 ~ Closing all streams
[00] 7/4 16:25:03 ~ Creating report...
[00] 7/4 16:25:03 ~ Sending report...
[01] 7/4 16:25:03 ~ Opening connection for delivery...
[01] 7/4 16:25:03 ~ Connecting to securemail.internode.on.net:465 Port:465
[01] 7/4 16:25:04 ~ Connected
[01] 7/4 16:25:04 > EHLO [192.168.1.2]
[01] 7/4 16:25:04 220 internode.on.net bld-mail19 ESMTP Ready
[01] 7/4 16:25:04 > EHLO [192.168.1.2]
[01] 7/4 16:25:04 250-internode.on.net. Hello [192.168.1.2] (118.208.12.55)
250-AUTH PLAIN LOGIN
250-ETRN
250-X-ID 626c642d6d61696c313931313230363430303333
250-SIZE 52428800
250 HELP
[01] 7/4 16:25:04 > AUTH PLAIN [email protected] *********
[01] 7/4 16:25:04 250-internode.on.net. Hello [192.168.1.2] (118.208.12.55)
250-AUTH PLAIN LOGIN
250-ETRN
250-X-ID 626c642d6d61696c313931313230363430303333
250-SIZE 52428800
250 HELP
[01] 7/4 16:25:04 > AUTH PLAIN [email protected] *********
[01] 7/4 16:25:04 235 login succeeded
[01] 7/4 16:25:04 > MAIL FROM:<[email protected]>
[01] 7/4 16:25:04 235 login succeeded
[01] 7/4 16:25:04 > MAIL FROM:<[email protected]>
[01] 7/4 16:25:04 250 Command MAIL OK
[01] 7/4 16:25:04 > RCPT TO:<[email protected]> [1/1]
[01] 7/4 16:25:05 250 Command MAIL OK
[01] 7/4 16:25:05 250 remote recipient accepted
[01] 7/4 16:25:05 ~ Stage 3 dispatch done [2/1]
[01] 7/4 16:25:05 > QUIT
[01] 7/4 16:25:05 354 Command DATA Start mail input; end with <CRLF>.<CRLF>
[01] 7/4 16:25:05 ~ Sending message
[01] 7/4 16:25:05 ~ with ID <[email protected]>
[01] 7/4 16:25:05 ~ To [email protected]
[01] 7/4 16:25:05 250 message sent ok
[01] 7/4 16:25:36 ~ Remote server has closed the connection after QUIT command (#102). Stage: 4
[01] 7/4 16:25:36 ~ Stage 4 dispatch done [2/1]
[00] 7/4 16:25:36 ~ [-]
[00] 7/4 16:25:36 ~ Finishing...
[00] 7/4 16:25:36 ~ Finished.
-----------------------------------------------------------------------
MaxBulk Mailer Delivery Report [#13] - 4/07/2010
-----------------------------------------------------------------------
Mailer version: 7.7-US Pro - Registered
Machine OS/speed: Windows Vista/2.913Ghz
Streams: 1 [1 Used] Single Server
Delivery mode: Singly (Tag processing ON)
SMTP server address: securemail.internode.on.net [Port: 465] SSL v3
Authentication: ESMTP (Plain) | [192.168.1.2]
Groups: 10 [Interval: 00:00:00]
Delivery start date: 4/07/2010 at 4:24:45 PM
End date: 4/07/2010 at 4:25:03 PM
Total duration: 18 second(s) - Retries: 0/6
Rate: 0.33 recipient(s)/second
to a total of: 6 recipient(s) [6/6]
List name: unknown
Sent: 5
Failed: 1 undelivered [Connection dropped by server]
Errors: 1
Mail subject: [Ann] test 04/07/1020
Mail priority: Normal
Return receipt: No
Mail format: Styled Text | iso-8859-1 | quoted-printable
Mail size: 287 Bytes (Doesn't include attachments)
Attachments: 1 (37.7 KB)
Encoding: Base64
-----------------------------------------------------------------------
Problem 1
HYPERLINKS when inserted into the email show up correctly in the preview, BUT when the email is received it is either in the following format:-
http://www.animal-acupuncture.com/samplemenu.pdf
http://www.animal-acupuncture.com
at 3 of 4 email addresses.
EDIT(I have just looked at my post and it has interpreted those hyperlinks as valid and even clickable...in my received emails they are usually black, not underlined, and certainly not clickable)EDIT
At the 4th address the links appear to display correctly, ie they are underlined and in blue, BUT altho clickable they
just provoke the error "is not a registered protocol".
I must say that all 4 addresses display clickable links correctly when received from non-MBM sources.
Sometimes one of the addresses will provoke the following situation...the SUBJECT line is removed, the SENDER is changed to <[email protected]>
and the body of the message is prepended with some stuff about MIME , then the rest of the body is presented minus the pic and garbled as follows
MAIL FROM:<[email protected]>
Message-Id: <smCTO7I2F71LyGjJxaMRWgEBeIKowkpsDfR7gyR4DdIS@animal-acupuncture.com>
Mime-Version: 1.0
From: "David Gilchrist" <[email protected]>
To: "davidgilchrist" <[email protected]>
Reply-To: [email protected]
Subject: [Ann] test 04/07/1020
Date: Sun, 4 Jul 2010 16:34:49 +1000
X-Bounce-Tracking-Info: <ZGF2aWRnaWxjaHJpc3QJCQlkYXZpZGdpbGNocmlzdEBhdXN0YXJuZXQuY29tLmF1CVtBbm5dIHRlc3QgMDQvMDcvMTAyMAkxNQkJNglib3VuY2UJbm8Jbm8=>
Content-type: multipart/alternative;
Boundary="--=BOUNDARY_741634_ANUQ_LGRU_AYVE_PTCY"
This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
----=BOUNDARY_741634_ANUQ_LGRU_AYVE_PTCY
Content-type: text/plain;
charset=iso-8859-1; format=flowed
Content-transfer-encoding: quoted-printable
Hello davidgilchrist,
this is a test=2E
here are some hyperlinks
www=2Eanimal-acupuncture=2Ecom/samplemenu=2Epdf
www=2Eanimal-acupuncture=2Ecom
did they appear in blue with blue underline?
were they clickable? successfully?
here is a picture
did it show up properly?
Thanx
D
PROBLEM 2
After importing a text list into the recipients pane
and sending to that list, I was always short either one or 2 deliveries.
Always the second in the list, and sometimes the first.
Didnt matter if the list was 5 or 20 addresses. Always the 2nd on the list didnt send.
Hmmm!
Error message was "503 Command rejected no valid MAIL FROM: command received yet.
I Hope you can help and I am missing something simple, because MBMis unusable for me. I am using Windows7.
Here is one of the logs...
[01] 7/4 16:24:47 ~ Opening connection for delivery...
[01] 7/4 16:24:47 ~ Connecting to securemail.internode.on.net:465 Port:465
[01] 7/4 16:24:48 ~ Connected
[01] 7/4 16:24:48 > EHLO [192.168.1.2]
[01] 7/4 16:24:49 220 internode.on.net bld-mail13 ESMTP Ready
[01] 7/4 16:24:49 > EHLO [192.168.1.2]
[01] 7/4 16:24:49 250-internode.on.net. Hello [192.168.1.2] (118.208.12.55)
250-AUTH PLAIN LOGIN
250-ETRN
250-X-ID 626c642d6d61696c313331313235333332363933
250-SIZE 52428800
250 HELP
[01] 7/4 16:24:49 > AUTH PLAIN [email protected] *********
[01] 7/4 16:24:49 250-internode.on.net. Hello [192.168.1.2] (118.208.12.55)
250-AUTH PLAIN LOGIN
250-ETRN
250-X-ID 626c642d6d61696c313331313235333332363933
250-SIZE 52428800
250 HELP
[01] 7/4 16:24:49 > AUTH PLAIN [email protected] *********
[01] 7/4 16:24:49 235 login succeeded
[01] 7/4 16:24:49 > MAIL FROM:<[email protected]>
[01] 7/4 16:24:49 235 login succeeded
[01] 7/4 16:24:49 > MAIL FROM:<[email protected]>
[01] 7/4 16:24:49 250 Command MAIL OK
[01] 7/4 16:24:49 > RCPT TO:<[email protected]> [1/6]
[01] 7/4 16:24:49 250 Command MAIL OK
[01] 7/4 16:24:49 250 remote recipient accepted
[01] 7/4 16:24:50 > MAIL FROM:<[email protected]>
[01] 7/4 16:24:50 354 Command DATA Start mail input; end with <CRLF>.<CRLF>
[01] 7/4 16:24:50 ~ Sending message
[01] 7/4 16:24:50 ~ with ID <[email protected]>
[01] 7/4 16:24:50 ~ To
[00] 7/4 16:24:50 ~ Sending attachment "Untitled-10.jpg"
[01] 7/4 16:24:52 250 message sent ok
[01] 7/4 16:24:52 > RCPT TO:<[email protected]> [2/6]
[01] 7/4 16:24:52 503 Command rejected no valid MAIL FROM: command received yet
[01] 7/4 16:24:52 > MAIL FROM:<[email protected]>
[01] 7/4 16:24:52 250 Command MAIL OK
[01] 7/4 16:24:52 > RCPT TO:<[email protected]> [3/6]
[01] 7/4 16:24:52 250 remote recipient accepted
[01] 7/4 16:24:53 354 Command DATA Start mail input; end with <CRLF>.<CRLF>
[01] 7/4 16:24:53 ~ Sending message
[01] 7/4 16:24:53 ~ with ID <[email protected]>
[01] 7/4 16:24:53 ~ To [email protected]
[00] 7/4 16:24:53 ~ Sending attachment "Untitled-10.jpg"
[01] 7/4 16:24:55 250 message sent ok
[01] 7/4 16:24:55 > MAIL FROM:<[email protected]>
[01] 7/4 16:24:55 250 Command MAIL OK
[01] 7/4 16:24:55 > RCPT TO:<[email protected]> [4/6]
[01] 7/4 16:24:55 250 remote recipient accepted
[01] 7/4 16:24:55 354 Command DATA Start mail input; end with <CRLF>.<CRLF>
[01] 7/4 16:24:55 ~ Sending message
[01] 7/4 16:24:55 ~ with ID <[email protected]>
[01] 7/4 16:24:55 ~ To [email protected]
[00] 7/4 16:24:56 ~ Sending attachment "Untitled-10.jpg"
[01] 7/4 16:24:58 250 message sent ok
[01] 7/4 16:24:58 > MAIL FROM:<[email protected]>
[01] 7/4 16:24:58 250 Command MAIL OK
[01] 7/4 16:24:58 > RCPT TO:<[email protected]> [5/6]
[01] 7/4 16:24:58 250 remote recipient accepted
[01] 7/4 16:24:58 354 Command DATA Start mail input; end with <CRLF>.<CRLF>
[01] 7/4 16:24:58 ~ Sending message
[01] 7/4 16:24:58 ~ with ID <[email protected]>
[01] 7/4 16:24:58 ~ To [email protected]
[00] 7/4 16:24:58 ~ Sending attachment "Untitled-10.jpg"
[01] 7/4 16:25:00 250 message sent ok
[01] 7/4 16:25:01 > MAIL FROM:<[email protected]>
[01] 7/4 16:25:01 250 Command MAIL OK
[01] 7/4 16:25:01 > RCPT TO:<[email protected]> [6/6]
[01] 7/4 16:25:01 250 local recipient ok
[01] 7/4 16:25:01 354 Command DATA Start mail input; end with <CRLF>.<CRLF>
[01] 7/4 16:25:01 ~ Sending message
[01] 7/4 16:25:01 ~ with ID <[email protected]>
[01] 7/4 16:25:01 ~ To [email protected]
[00] 7/4 16:25:01 ~ Sending attachment "Untitled-10.jpg"
[01] 7/4 16:25:03 250 message sent ok
[01] 7/4 16:25:03 ~ Stage 3 dispatch done [7/6]
[01] 7/4 16:25:03 > QUIT
[01] 7/4 16:25:03 221 Command QUIT, disconnecting
[01] 7/4 16:25:03 ~ Stage 4 dispatch done [7/6]
[00] 7/4 16:25:03 ~ [-]
[00] 7/4 16:25:03 ~ Closing all streams
[00] 7/4 16:25:03 ~ Creating report...
[00] 7/4 16:25:03 ~ Sending report...
[01] 7/4 16:25:03 ~ Opening connection for delivery...
[01] 7/4 16:25:03 ~ Connecting to securemail.internode.on.net:465 Port:465
[01] 7/4 16:25:04 ~ Connected
[01] 7/4 16:25:04 > EHLO [192.168.1.2]
[01] 7/4 16:25:04 220 internode.on.net bld-mail19 ESMTP Ready
[01] 7/4 16:25:04 > EHLO [192.168.1.2]
[01] 7/4 16:25:04 250-internode.on.net. Hello [192.168.1.2] (118.208.12.55)
250-AUTH PLAIN LOGIN
250-ETRN
250-X-ID 626c642d6d61696c313931313230363430303333
250-SIZE 52428800
250 HELP
[01] 7/4 16:25:04 > AUTH PLAIN [email protected] *********
[01] 7/4 16:25:04 250-internode.on.net. Hello [192.168.1.2] (118.208.12.55)
250-AUTH PLAIN LOGIN
250-ETRN
250-X-ID 626c642d6d61696c313931313230363430303333
250-SIZE 52428800
250 HELP
[01] 7/4 16:25:04 > AUTH PLAIN [email protected] *********
[01] 7/4 16:25:04 235 login succeeded
[01] 7/4 16:25:04 > MAIL FROM:<[email protected]>
[01] 7/4 16:25:04 235 login succeeded
[01] 7/4 16:25:04 > MAIL FROM:<[email protected]>
[01] 7/4 16:25:04 250 Command MAIL OK
[01] 7/4 16:25:04 > RCPT TO:<[email protected]> [1/1]
[01] 7/4 16:25:05 250 Command MAIL OK
[01] 7/4 16:25:05 250 remote recipient accepted
[01] 7/4 16:25:05 ~ Stage 3 dispatch done [2/1]
[01] 7/4 16:25:05 > QUIT
[01] 7/4 16:25:05 354 Command DATA Start mail input; end with <CRLF>.<CRLF>
[01] 7/4 16:25:05 ~ Sending message
[01] 7/4 16:25:05 ~ with ID <[email protected]>
[01] 7/4 16:25:05 ~ To [email protected]
[01] 7/4 16:25:05 250 message sent ok
[01] 7/4 16:25:36 ~ Remote server has closed the connection after QUIT command (#102). Stage: 4
[01] 7/4 16:25:36 ~ Stage 4 dispatch done [2/1]
[00] 7/4 16:25:36 ~ [-]
[00] 7/4 16:25:36 ~ Finishing...
[00] 7/4 16:25:36 ~ Finished.
-----------------------------------------------------------------------
MaxBulk Mailer Delivery Report [#13] - 4/07/2010
-----------------------------------------------------------------------
Mailer version: 7.7-US Pro - Registered
Machine OS/speed: Windows Vista/2.913Ghz
Streams: 1 [1 Used] Single Server
Delivery mode: Singly (Tag processing ON)
SMTP server address: securemail.internode.on.net [Port: 465] SSL v3
Authentication: ESMTP (Plain) | [192.168.1.2]
Groups: 10 [Interval: 00:00:00]
Delivery start date: 4/07/2010 at 4:24:45 PM
End date: 4/07/2010 at 4:25:03 PM
Total duration: 18 second(s) - Retries: 0/6
Rate: 0.33 recipient(s)/second
to a total of: 6 recipient(s) [6/6]
List name: unknown
Sent: 5
Failed: 1 undelivered [Connection dropped by server]
Errors: 1
Mail subject: [Ann] test 04/07/1020
Mail priority: Normal
Return receipt: No
Mail format: Styled Text | iso-8859-1 | quoted-printable
Mail size: 287 Bytes (Doesn't include attachments)
Attachments: 1 (37.7 KB)
Encoding: Base64
-----------------------------------------------------------------------
