Error 554 5.7.1

J

jbabo

New Member
I am sending out our newsletter in Test Mode and I'm getting a Mail Delivery Failed message with an error code of 554 5.7.1

The message recipient email is the same as the sender email and I've done this in the past with no problems. The message goes through if I send it to a different email address from the recipient.

Any ideas?
 
J

jbabo

New Member
Here it is…

[01] 5/28 10:32:54 ~ Status: Opening connection for delivery...
[01] 5/28 10:32:54 ~ Status: Connecting to pop.earthlink.net for POP authentication...
[00] 5/28 10:32:54 +OK NGPopper vEL_0_1_36_P at earthlink.net ready <[email protected]>
[00] 5/28 10:32:54 > USER [email protected]
[00] 5/28 10:32:54 +OK Pass required for [email protected]
[00] 5/28 10:32:54 > PASS xxx
[00] 5/28 10:32:54 +OK xxx has 0 messages (0 octets).
[00] 5/28 10:32:54 > QUIT
[00] 5/28 10:32:55 +OK
[01] 5/28 10:32:55 ~ Status: Connecting to smtpauth.earthlink.net Port:25
[01] 5/28 10:32:55 ~ Status: Connected
[01] 5/28 10:32:55 220-elasmtp-masked.atl.sa.earthlink.net ESMTP Exim 4.67 #1 Fri, 28 May 2010 12:33:09 -0400
220-NO UCE. EarthLink does not authorize the use of its computers or network
220 equipment to accept, transmit, or distribute unsolicited e-mail.
[01] 5/28 10:32:55 > HELO [192.168.1.33]
[01] 5/28 10:32:55 250 elasmtp-masked.atl.sa.earthlink.net Hello [192.168.1.33] [70.57.252.234]
[01] 5/28 10:32:55 > MAIL FROM:<[email protected]>
[01] 5/28 10:32:55 250 OK
[01] 5/28 10:32:55 > RCPT TO:<[email protected]> [TEST OF <[email protected]>]
[01] 5/28 10:33:00 550 Please configure your mail client to use authentication.
[01] 5/28 10:33:00 ~ Status: Relaying denied error, let's try ESMTP authentication scheme [1/1]
[01] 5/28 10:33:00 > EHLO [192.168.1.33]
[01] 5/28 10:33:00 250-elasmtp-masked.atl.sa.earthlink.net Hello [192.168.1.33] [70.57.252.234]
250-SIZE 14680064
250-PIPELINING
250-AUTH PLAIN LOGIN CRAM-MD5
250-STARTTLS
250 HELP
[01] 5/28 10:33:00 > AUTH PLAIN [email protected] *******
[01] 5/28 10:33:01 235 Authentication succeeded
[01] 5/28 10:33:01 > MAIL FROM:<[email protected]>
[01] 5/28 10:33:01 250 OK
[01] 5/28 10:33:01 > RCPT TO:<[email protected]> [TEST OF <[email protected]>]
[01] 5/28 10:33:01 250 Accepted
[01] 5/28 10:33:01 354 Enter message, ending with "." on a line by itself
[00] 5/28 10:33:01 ~ Status: Sending attachment "JRBeMailLogo.gif"
[00] 5/28 10:33:01 ~ Status: Sending attachment "MMJlogoSM.jpg"
[00] 5/28 10:33:01 ~ Status: Sending attachment "WebFbook.jpg"
[01] 5/28 10:33:02 250 OK id=1OI2Ul-00063M-Ht
[01] 5/28 10:33:02 ~ Status: Stage 3 dispatch done [2/1]
[01] 5/28 10:33:02 > QUIT
[01] 5/28 10:33:02 221 elasmtp-masked.atl.sa.earthlink.net closing connection
[01] 5/28 10:33:02 ~ Status: Stage 4 dispatch done [2/1]
[00] 5/28 10:33:02 ~ Status: [-]
[00] 5/28 10:33:02 ~ Status: Closing all streams
[00] 5/28 10:33:02 ~ Status: Creating report...
[00] 5/28 10:33:02 ~ Status: Sending report...
[01] 5/28 10:33:02 ~ Status: Opening connection for delivery...
[01] 5/28 10:33:02 ~ Status: Connecting to pop.earthlink.net for POP authentication...
[00] 5/28 10:33:02 +OK NGPopper vEL_0_1_36_P at earthlink.net ready <[email protected]>
[00] 5/28 10:33:02 > USER [email protected]
[00] 5/28 10:33:02 +OK Pass required for [email protected]
[00] 5/28 10:33:02 > PASS *******
[00] 5/28 10:33:02 +OK xxx has 0 messages (0 octets).
[00] 5/28 10:33:02 > QUIT
[00] 5/28 10:33:02 +OK
[01] 5/28 10:33:02 ~ Status: Connecting to smtpauth.earthlink.net Port:25
[01] 5/28 10:33:03 ~ Status: Connected
[01] 5/28 10:33:03 220-elasmtp-kukur.atl.sa.earthlink.net ESMTP Exim 4.67 #1 Fri, 28 May 2010 12:33:17 -0400
220-NO UCE. EarthLink does not authorize the use of its computers or network
220 equipment to accept, transmit, or distribute unsolicited e-mail.
[01] 5/28 10:33:03 > HELO [192.168.1.33]
[01] 5/28 10:33:03 250 elasmtp-kukur.atl.sa.earthlink.net Hello [192.168.1.33] [70.57.252.234]
[01] 5/28 10:33:03 > MAIL FROM:<[email protected]>
[01] 5/28 10:33:03 250 OK
[01] 5/28 10:33:03 > RCPT TO:<[email protected]> [TEST OF <[email protected]>]
[01] 5/28 10:33:08 550 Please configure your mail client to use authentication.
[01] 5/28 10:33:08 ~ Status: Relaying denied error, let's try ESMTP authentication scheme [1/1]
[01] 5/28 10:33:08 > EHLO [192.168.1.33]
[01] 5/28 10:33:08 250-elasmtp-kukur.atl.sa.earthlink.net Hello [192.168.1.33] [70.57.252.234]
250-SIZE 14680064
250-PIPELINING
250-AUTH PLAIN LOGIN CRAM-MD5
250-STARTTLS
250 HELP
[01] 5/28 10:33:08 > AUTH PLAIN [email protected] *******
[01] 5/28 10:33:08 235 Authentication succeeded
[01] 5/28 10:33:08 > MAIL FROM:<[email protected]>
[01] 5/28 10:33:09 250 OK
[01] 5/28 10:33:09 > RCPT TO:<[email protected]> [TEST OF <[email protected]>]
[01] 5/28 10:33:09 250 Accepted
[01] 5/28 10:33:09 354 Enter message, ending with "." on a line by itself
[01] 5/28 10:33:09 250 OK id=1OI2Ut-0005JQ-E4
[01] 5/28 10:33:09 ~ Status: Stage 3 dispatch done [2/1]
[01] 5/28 10:33:09 > QUIT
[01] 5/28 10:33:09 221 elasmtp-kukur.atl.sa.earthlink.net closing connection
[01] 5/28 10:33:10 ~ Status: Stage 4 dispatch done [2/1]
[00] 5/28 10:33:10 ~ Status: [-]
[00] 5/28 10:33:10 ~ Status: Finishing...
[00] 5/28 10:33:10 ~ Status: Finished.

-----------------------------------------------------------------------
MaxBulk Mailer Delivery Report [#113] - 5/28/10 *** Test Mail ***
-----------------------------------------------------------------------

Mailer version: 7.1-US Pro - Registered
Machine OS/speed: Mac OS 10.4.11 Tiger/1.8Ghz

Streams: 1 [1 Used] Single Server
Delivery mode: Bulk (Tag processing OFF)

SMTP server address: smtpauth.earthlink.net [Port: Default] SSL Off
Authentication: POP | [192.168.1.33]
Address: pop.earthlink.net [Port: Default] SSL Off
Groups: 50 [Interval: 00:00:00]

Delivery start date: 5/28/10 at 10:32:53 AM
End date: 5/28/10 at 10:33:02 AM
Total duration: 9 second(s) - Retries: 0/6
Rate: 0.22 recipient(s)/second

to a total of: Test Mail
List name: unknown
Sent: 1

Mail subject: Newsletter
Mail priority: Normal
Return receipt: No
Mail format: Text|HTML | iso-8859-1 | quoted-printable
Mail size: 4.26 KB (Doesn't include attachments)
Attachments: 3 (10.5 KB)
Encoding: Base64

-----------------------------------------------------------------------
 
J

jbabo

New Member
I've tried ESMTP and followed the settings for Earthlink on your support page but I'm still getting the mail delivery failed message with the same error message (554 5.7.1 Your message failed several antispam checks (SCORING) and it was rejected…) when I send out a test delivery.

If I send it to a different, non-Earthlink email, it works fine. I worry that if I send the email out to the full list, I'm going to get all of those to Earthlink addresses back as undeliverable.
 
J

jbabo

New Member
Thanks for the info. I'll try to see what is triggering this with Erthlink and report back.

One other question… one of my email attempts has Undisclosed-Recipients:; in the "To" line and the Spam Check flagged it. Is there a way to change or remove that?

Thanks
 
You must log in or register to reply here.
Top