Hi,
I am looking to send out a mass email list using Mailer.
I have sent some out already but i am getting this error back.
[01] 10/1 13:00:45 ~ Status: Opening connection for delivery...
[01] 10/1 13:00:45 --> Connecting socket [1] with 5,348 entries to 192.168.2.10 Port:25
[00] 10/1 13:00:45 [POP3 ERROR] 103 - Address invalid.
[01] 10/1 13:00:45 ~ Status: Connected
[01] 10/1 13:00:45 220 Welcome to financialempowerment.co.uk
[01] 10/1 13:00:45 > HELO [192.168.2.100]
[01] 10/1 13:00:45 250 Hello.
[01] 10/1 13:00:45 > MAIL FROM:<[email protected]>
[01] 10/1 13:00:45 250 OK
[01] 10/1 13:00:45 > RCPT TO:<mail@*****.co.uk> [1/5348]
[01] 10/1 13:00:45 250 OK
[01] 10/1 13:00:45 354 OK, send.
[00] 10/1 13:00:45 ~ Status: Sending attachment "logobar.gif"
[01] 10/1 13:00:45 250 Queued (0.141 seconds)
[01] 10/1 13:00:45 > MAIL FROM:<[email protected]>
[01] 10/1 13:00:45 250 OK
[01] 10/1 13:00:45 > RCPT TO:<[email protected]> [2/5348]
[01] 10/1 13:00:45 250 OK
[01] 10/1 13:00:45 354 OK, send.
[00] 10/1 13:00:45 ~ Status: Sending attachment "logobar.gif"
[01] 10/1 13:00:46 250 Queued (0.141 seconds)
[01] 10/1 13:00:46 > MAIL FROM:<[email protected]>
[01] 10/1 13:00:46 250 OK
[01] 10/1 13:00:46 > RCPT TO:<[email protected]> [3/5348]
[01] 10/1 13:00:46 250 OK
[01] 10/1 13:00:46 354 OK, send.
[00] 10/1 13:00:46 ~ Status: Sending attachment "logobar.gif"
[01] 10/1 13:00:46 250 Queued (0.250 seconds)
[01] 10/1 13:00:46 > MAIL FROM:<[email protected]>
[01] 10/1 13:00:46 250 OK
[01] 10/1 13:00:46 > RCPT TO:<[email protected]> [4/5348]
[01] 10/1 13:00:46 250 OK
[01] 10/1 13:00:46 354 OK, send.
[00] 10/1 13:00:46 ~ Status: Sending attachment "logobar.gif"
[01] 10/1 13:00:46 250 Queued (0.219 seconds)
[01] 10/1 13:00:46 ~ Status: Stage 3 dispatch done [5/5348]
[01] 10/1 13:00:46 ~ Status: Delay of 5s [00:00:05]
[01] 10/1 13:00:46 > QUIT
[01] 10/1 13:00:46 221 goodbye
[01] 10/1 13:00:46 ~ Status: Stage 4 dispatch done [5/5348]
[01] 10/1 13:00:46 ~ Status: Next Delivery in 00:00:05
[00] 10/1 13:00:48 ~ Status: Canceling process...
[00] 10/1 13:00:48 ~ Status: Asking socket #1 to QUIT...
[00] 10/1 13:00:48 ~ Status: [-]
[00] 10/1 13:00:48 ~ Status: Closing all streams
[00] 10/1 13:00:48 ~ Status: Creating report...
[00] 10/1 13:00:48 ~ Status: Sending report...
[01] 10/1 13:00:48 ~ Status: Opening connection for delivery...
[01] 10/1 13:00:48 --> Connecting socket [1] with 1 entries to 192.168.2.10 Port:25
[00] 10/1 13:00:48 [POP3 ERROR] 103 - Address invalid.
[00] 10/1 13:00:48 ~ Status: [-]
[00] 10/1 13:00:48 ~ Status: Closing all streams
[00] 10/1 13:00:48 ~ Status: Finishing...
[01] 10/1 13:00:48 ~ Status: Connected
-----------------------------------------------------------------------
MaxBulk Mailer Delivery Report [#83] - 01/10/2008
-----------------------------------------------------------------------
Mailer version: 5.7.1-US Pro - Registered
Machine OS/speed: Mac OS 10.5.5 Leopard/2Ghz
Streams: 5 [1 Used] Single Server
Delivery mode: Singly (Tag processing ON)
SMTP server address: 192.168.2.10 [Port: Default] SSL Off
Authentication: POP | [192.168.2.100]
Address: [email protected] [Port: Default] SSL Off
Groups: 5 [Interval: 00:00:05]
Delivery start date: 01/10/2008 at 13:00:44
End date: 01/10/2008 at 13:00:48
Total duration: 4 second(s) - Retries: 0/10
Rate: 1.25 recipient(s)/second
to a total of: 5,348 recipient(s) [5,348/6,363]
Sent: 4
Failed: 5,344 (Bounces not included!)
Mail subject: BN Jackson Norton. Business Recovery and Insolvency Specialists
Mail priority: Normal
Return receipt: No
Mail format: HTML only [ISO-8859-1]
Mail size: 4.02 KB (Doesn't include attachments)
Attachments: 1 (1.5 KB)
Encoding: Base64
-----------------------------------------------------------------------
[00] 10/1 13:00:48 ~ Status: Finished.
I have changed the names of the email addresses.
The error is that it comes up with error 103. It makes a sort of beep and shows it in the heading at the top before it sends as well.
I have the server set up the house next to me.
What do i need to do?
Will the emails be going out?
Thanks for you help.
Regards,
Andrew
I am looking to send out a mass email list using Mailer.
I have sent some out already but i am getting this error back.
[01] 10/1 13:00:45 ~ Status: Opening connection for delivery...
[01] 10/1 13:00:45 --> Connecting socket [1] with 5,348 entries to 192.168.2.10 Port:25
[00] 10/1 13:00:45 [POP3 ERROR] 103 - Address invalid.
[01] 10/1 13:00:45 ~ Status: Connected
[01] 10/1 13:00:45 220 Welcome to financialempowerment.co.uk
[01] 10/1 13:00:45 > HELO [192.168.2.100]
[01] 10/1 13:00:45 250 Hello.
[01] 10/1 13:00:45 > MAIL FROM:<[email protected]>
[01] 10/1 13:00:45 250 OK
[01] 10/1 13:00:45 > RCPT TO:<mail@*****.co.uk> [1/5348]
[01] 10/1 13:00:45 250 OK
[01] 10/1 13:00:45 354 OK, send.
[00] 10/1 13:00:45 ~ Status: Sending attachment "logobar.gif"
[01] 10/1 13:00:45 250 Queued (0.141 seconds)
[01] 10/1 13:00:45 > MAIL FROM:<[email protected]>
[01] 10/1 13:00:45 250 OK
[01] 10/1 13:00:45 > RCPT TO:<[email protected]> [2/5348]
[01] 10/1 13:00:45 250 OK
[01] 10/1 13:00:45 354 OK, send.
[00] 10/1 13:00:45 ~ Status: Sending attachment "logobar.gif"
[01] 10/1 13:00:46 250 Queued (0.141 seconds)
[01] 10/1 13:00:46 > MAIL FROM:<[email protected]>
[01] 10/1 13:00:46 250 OK
[01] 10/1 13:00:46 > RCPT TO:<[email protected]> [3/5348]
[01] 10/1 13:00:46 250 OK
[01] 10/1 13:00:46 354 OK, send.
[00] 10/1 13:00:46 ~ Status: Sending attachment "logobar.gif"
[01] 10/1 13:00:46 250 Queued (0.250 seconds)
[01] 10/1 13:00:46 > MAIL FROM:<[email protected]>
[01] 10/1 13:00:46 250 OK
[01] 10/1 13:00:46 > RCPT TO:<[email protected]> [4/5348]
[01] 10/1 13:00:46 250 OK
[01] 10/1 13:00:46 354 OK, send.
[00] 10/1 13:00:46 ~ Status: Sending attachment "logobar.gif"
[01] 10/1 13:00:46 250 Queued (0.219 seconds)
[01] 10/1 13:00:46 ~ Status: Stage 3 dispatch done [5/5348]
[01] 10/1 13:00:46 ~ Status: Delay of 5s [00:00:05]
[01] 10/1 13:00:46 > QUIT
[01] 10/1 13:00:46 221 goodbye
[01] 10/1 13:00:46 ~ Status: Stage 4 dispatch done [5/5348]
[01] 10/1 13:00:46 ~ Status: Next Delivery in 00:00:05
[00] 10/1 13:00:48 ~ Status: Canceling process...
[00] 10/1 13:00:48 ~ Status: Asking socket #1 to QUIT...
[00] 10/1 13:00:48 ~ Status: [-]
[00] 10/1 13:00:48 ~ Status: Closing all streams
[00] 10/1 13:00:48 ~ Status: Creating report...
[00] 10/1 13:00:48 ~ Status: Sending report...
[01] 10/1 13:00:48 ~ Status: Opening connection for delivery...
[01] 10/1 13:00:48 --> Connecting socket [1] with 1 entries to 192.168.2.10 Port:25
[00] 10/1 13:00:48 [POP3 ERROR] 103 - Address invalid.
[00] 10/1 13:00:48 ~ Status: [-]
[00] 10/1 13:00:48 ~ Status: Closing all streams
[00] 10/1 13:00:48 ~ Status: Finishing...
[01] 10/1 13:00:48 ~ Status: Connected
-----------------------------------------------------------------------
MaxBulk Mailer Delivery Report [#83] - 01/10/2008
-----------------------------------------------------------------------
Mailer version: 5.7.1-US Pro - Registered
Machine OS/speed: Mac OS 10.5.5 Leopard/2Ghz
Streams: 5 [1 Used] Single Server
Delivery mode: Singly (Tag processing ON)
SMTP server address: 192.168.2.10 [Port: Default] SSL Off
Authentication: POP | [192.168.2.100]
Address: [email protected] [Port: Default] SSL Off
Groups: 5 [Interval: 00:00:05]
Delivery start date: 01/10/2008 at 13:00:44
End date: 01/10/2008 at 13:00:48
Total duration: 4 second(s) - Retries: 0/10
Rate: 1.25 recipient(s)/second
to a total of: 5,348 recipient(s) [5,348/6,363]
Sent: 4
Failed: 5,344 (Bounces not included!)
Mail subject: BN Jackson Norton. Business Recovery and Insolvency Specialists
Mail priority: Normal
Return receipt: No
Mail format: HTML only [ISO-8859-1]
Mail size: 4.02 KB (Doesn't include attachments)
Attachments: 1 (1.5 KB)
Encoding: Base64
-----------------------------------------------------------------------
[00] 10/1 13:00:48 ~ Status: Finished.
I have changed the names of the email addresses.
The error is that it comes up with error 103. It makes a sort of beep and shows it in the heading at the top before it sends as well.
I have the server set up the house next to me.
What do i need to do?
Will the emails be going out?
Thanks for you help.
Regards,
Andrew
