Don't understand burst mode/connections

[pizzafilms]

Please help me configure MaxBulk to send as many emails as fast as possible.

My limits are: 4 server accounts, each one has a 20 per minute limit.

I set each sever account to: Group=20, Interval=minute, Connections=1.

Then I turned on Burst Mode. I expected for each account to send out 20 emails per minute for a total of 80 every minute, but all it sent was 20 each time.

What's up?

What do I set the Connections to in Burst mode?

Confused...

Thanks!

 

[stanbusk]

Are they 4 different accounts on 4 different servers?

 

[pizzafilms]

It's actually 2 different accounts on 2 different servers. Like:

ray1@something
ray2@something
ray1@somethingelse
ray2@somethingelse

 

[stanbusk]

Have you selected the 4 servers in the burst mode list? Have you tried to use accounts on different servers? It is possible your server track you by IP so however you are using 2 accounts the limitation may be for both.

 

[totir]

I have the same problem

In Burst mode, with several servers selected,
MaxBurst Pro only sends from one server, and doesn't do anything with all the others.

Has this issue been solved? Thanks

 

[stanbusk]

How many connections have you selected from the 'Connections' pull-down menu? Are the server you want to use 'checked'?

 

[totir]

I have selected 3 different servers (different domains)
I ticked them, and saved the burst mode parameters

Stranger, yesterday, once the first email has been sent, the countdown became a countup

 

[stanbusk]

How many connections have you selected from the 'Connections' pull-down menu?

 

[totir]

I have selected 3 different servers (different domains)
I ticked them, and saved the burst mode parameters

Please tell me if I haven't answer your question ??

 

[stanbusk]

I want to know the number of conenctions, how many have you selected from the 'Connections' pull-down menu?

 

[totir]

T H R E E
3
tres
tre
Drei
trois
kolm
drvo


I have selected 3 different servers (they have different domains)
I ticked them, and saved the burst mode parameters

Those I ticked are in the pull-down menu.

As you know, you can't select several servers using the pull-down menu.
You have to select Busrt mode first, and then tick the servers you want to use.

 

[stanbusk]

Ok, so you have selected 3 connections from the connections pull-down menu and 3 server from the server list, right? Have you tried to select 5 connections?

Please avoid writing all uppercase or write useless information else I will stop responding.

 

[reza_shnia]

i have same problem

i select 5 smtp server in brust mode and select 5 connections from the connections pull-down menu.
but the MaxBulk Mailer , just work whit the first server
tnx

 

[stanbusk]

I have tried here with current v6.5 and it works for me as expected. I first entered all the servers and tested them individually, then I selected burst mode, checked the server I wanted to use and make sure to set as much connections. When clicking on the Send button all the servers are used as expected.